en

IMPREGNATION  FILA  W68

Impregnation FILA W68 1l

A water-based stain remover for unpolished surfaces, suitable for indoor and outdoor paving and wall tiles.

It is used on the following types of surfaces: cement, terracotta, clinker, concrete, stone and non-glossy agglomerates.

Impregnation FILA W68 1 litre

Price including VAT

 1 891 Kč / 1 litre

Contact


What is the FILA W68 used for?

  • It impregnates and protects absorbent materials such as cement, untreated natural stone and terracotta against oil-based stains.
  • It significantly reduces the material's absorbency without compromising its appearance.
  • It is suitable for both indoor and outdoor floors.


What are the advantages of the FILA W68?

  • Contains water: the most environmentally friendly treatment, which significantly reduces working time as it can be applied to surfaces with residual moisture.
  • Does not contain hydrocarbon solvents.
  • Does not form a surface film.
  • It does not compromise the frost resistance of terracotta.
  • It is excellent for cementitious surfaces.
  • It is certified as 'suitable for contact with food'.
  • A product with very low VOC emissions: certified by the GEC and labelled EC1Plus, it contributes towards achieving LEED credits.


How do you use the FILA W68?

  • The product is ready for use and does not need to be diluted.
  • Apply one coat of W68 to a dry and clean concrete surface using a brush, ensuring even coverage, including thorough impregnation of the joints.
  • Once dry, apply a second coat.
  • Before the product dries, remove any excess unabsorbed product using a microfibre cloth.
  • Subsequent maintenance: a diluted solution of CLEANER PRO.

Technical specifications of the FILA W68:

  • Appearance: liquid
  • Odour: alcoholic
  • Colour: pale yellow
  • Density: 1.010 kg/litre
  • pH: 4.6

Approximate coverage of FILA W68:

  • Terracotta (rustic, smoothed, 'imprunetino'): 1 litre / 15–20 m²
  • Cement, terracotta (handmade, in lumps, in brick form): 1 litre / 7–10 m²
  • Stone: 1 litre / 10–20 m²

The coverage figures given are approximate and apply to a single coat.

Warning:

  • Test the product on a small area of the surface to check for any colour changes.
  • Do not apply the product outdoors if rain is forecast.
  • Does not protect against the effects of acid.


Temperatures

  • Storage temperature: 5 to 30 °C.
  • The product should be applied to the material at a temperature between 10 and 30 °C.


Warning

  • Keep out of reach of children.
  • Recycle the packaging after use.
  • The product in the canister is not frost-resistant. Store at ambient temperature.
  • In order for an external floor to be treated, it must be laid to perfection and thus meet all the requirements for the given application, such as: compliance with the specified slope, correct installation of expansion joints, perfect ground insulation, and verified frost resistance of the material.